Cisco 1503 Software Manual page 28

Command Summary
show management information
Syntax:
Mode:
Description:
3-28
Cisco Micro Hub User Guide
show management information
Guest
Displays information about the network management hub as follows:
Hub> show management information
Hub id: 1
H/W version : 1.
F/W version: 1.01
Bootup option : normal
Physical address: 00-00-12-34-56-78
Command Display Definitions
• Hub id—Number used to identify the hub in a stack. An integer between 1
and 5. Read the section "Hub ID Numbers" earlier in this chapter for
information about how to determine hub ID numbers.
• H/W version—Hardware version of the hub.
• F/W version—Firmware version of the hub.
• Bootup option—Bootup option configured with the bootup-option
command as described in the section "Bootup Option Commands" earlier in
this chapter.
• Physical address—Hardware address (also called the MAC address or the
Ethernet address) of the hub. This address is assigned by the device's
manufacturer and usually appears somewhere on the device itself.