Cisco 1503 Software Manual page 15

exit
Syntax:
Mode:
Description:
help
Syntax:
Mode:
Description:
Console Access Commands
Use the commands in this section to control console access to the hub configuration.
show console lockout info
Syntax:
Mode:
Description:
exit
Guest
Exits any command mode or closes an active terminal session.
help
Guest
Refer to the previous section "System Help Commands" for more information
on the help command.
show console-lockout info
Guest
Displays information about the console lockout settings. The following
information is displayed:
• Status—Whether console lockout is enabled or disabled.
• Delay time—Length of time of no keyboard activity until console access to
the hub is locked.
User Interface Commands
Using Your Hub Software 3-15