Cisco 1503 Software Manual page 36

Command Summary
Hub Configuration Command
Use the commands in this section to display information about hubs in a stack.
show hub information
Syntax:
Mode:
Description:
3-36
Cisco Micro Hub User Guide
show hub information [hub id]
Guest
Displays information about one or more hubs in a stack.
Command Keyword Definition
• hub id—(Optional) Number used to identify the hub in a stack. An integer
between 1 and 5. Read the section "Hub ID Numbers" earlier in this chapter
for information about how to determine hub ID numbers. If no number is
entered, information about all hubs in the stack will be displayed.
The display appears as follows:
Hub> show hub information
Hub ID Type H/W ver
-----------------------------------------
1 1503 1.0
2 1502 1.0
3 1503 1.0
Command Display Definitions
• Hub ID—Number used to identify the hub in a stack. An integer between 1
and 5. Read the section "Hub ID Numbers" earlier in this chapter for
information about how to determine hub ID numbers.
• Type—Model number of the hub: 1502 or 1503.
• H/W ver—Hub's hardware version.
• F/W ver—Hub's firmware version.
• Agent—Whether or not the hub contains an active SNMP agent.
F/W ver SNMP-Agent
1.01 Yes
1.01 No
1.01 No