Tn3270-Server - Cisco 11.0 BT Release Notes

tn3270-server

tn3270-server
Use the tn3270-server interface configuration command to start the TN3270 server on a CIP or to
enter TN3270 configuration mode. Use the no form of this command to disable all TN3270 server
activity on a CIP.
Syntax Description
This command has no arguments or keywords.
Default
No TN3270 server function is enabled.
Command Mode
Interface configuration
Usage Guidelines
Only one TN3270 server can run on a CIP. It will always be configured on port 2, which is the
internal LAN interface port.
The no tn3270-server command shuts down TN3270 server immediately. All active sessions will
be disconnected and all DLUR and PU definitions deleted from the router configuration. To restart
a TN3270 server, you must reconfigure all parameters.
Example
The following command starts the TN3270 server and enters TN3270 configuration mode:
54 TN3270 Server Commands
tn3270-server
no tn3270-server
tn3270-server