Dlus-Backup - Cisco 11.0 BT Release Notes

dlus-backup

Use the dlus-backup DLUR configuration command to specify a backup DLUS for the DLUR
function. Use the no form of this command to remove a backup DLUS name.
dlus-backup dlusname2
no dlus-backup
Syntax Description
dlusname2
Default
No backup DLUS is specified.
Command Mode
DLUR configuration
Usage Guidelines
Only one backup DLUS can be specified per CIP. If the backup DLUS specified in the dlus-backup
command is in use when a no dlus-backup is issued, the connection is not torn down.
Several parameters in the DLUR configuration mode consist of fully qualified names, as defined by
the APPN architecture. Fully qualified names consist of two case-insensitive alphanumeric strings,
separated by a period. However, for compatibility with existing APPN products, including VTAM,
the characters "#" (pound), "@" (at), and "$" (dollar) are allowed in the fully qualified name strings.
Each string is from one to eight characters long; for example, RA12.NODM1PP. The portion of the
name before the period is the NETID and is shared between entities in the same logical network.
Example
The following command specifies SYD.VMX as the backup DLUS:
dlus-backup SYD.VMX
Fully qualified name of the backup DLUS for the DLUR.
dlus-backup
TN3270 Server Commands 21