Show Extended Channel Tn3270-Server Pu - Cisco 11.0 BT Release Notes

show extended channel tn3270-server pu

Use the show extended channel tn3270-server pu privileged EXEC command to display the PU
configuration parameters, statistics and all the LUs currently attached to the PU.
show extended channel slot/2 tn3270-server pu
Syntax Description
extended channel
slot/2
pu-name
Command Mode
Privileged EXEC
Usage Guideline
The display shown depends on whether the PU is a direct PU or a SNA session switch PU.
Sample Displays
The following is sample output on the Cisco 7000 from the show extended channel tn3270-server
pu command for a direct PU:
router# show extended channel 3/2 tn3270-server pu EXT2
name(index)
EXT2(1)
idle-time
bytes 100 in, out; frames 90 in, 4 out; NegRsp 6 in, 0 out
actlus 4, dactlus 0, binds 0
lu
1
2
The following is sample output on the Cisco 7000 from the show extended channel tn3270-server
pu command for a SNA session switch PU:
router# show extended channel 3/2 tn3270-server pu INT1
name(index)
INT1(5)
idle-time
bytes 50 in, out; frames 87 in, 2 out; NegRsp 3 in, 0 out
actlus 2, dactlus 0, binds 0
lu
1
2
(Optional) Specifies a particular CIP in the router where slot is the
slot number. The port value for a TN3270 server will always be 2.
PU name that uniquely identifies this PU.
ip:tcp
172.28.1.106:23
0 keepalive
name client-ip:tcp
EXT2001 171.69.176.34:1897
EXT2002 never connected
ip:tcp
172.28.1.106:23
0 keepalive
name client-ip:tcp
GOAN1X01 never connected
GOAN1X02 never connected
show extended channel tn3270-server pu
pu-name
xid state link
05D18092 ACTIVE tok 0
0 unbind-act discon
state model frames in out
ACTIVE 327805 1
ACTIVE 1
xid state link
05D18091 ACTIVE dlur
0 unbind-act discon
state model frames in out
ACTIVE 1
ACTIVE 1
destination r-lsap
4000.7470.00e7 08 04
generic-pool perm
idle for
1 4:32:49
1 4:32:49
destination r-lsap
MPX.GOAN1
generic-pool perm
idle for
1 0:32:14
1 0:32:14
TN3270 Server Commands 45