Guideline - Husqvarna FE 350 2014 Repair Manual

6
FORK, TRIPLE CLAMP
-
Tighten screws (3.

Guideline

I
Screw, bottom triple clamp
-
Tighten screw •.
Guideline
I
Screw, top steering head
-
Mount and tighten screw@.
Guideline
Screw, top steering stem
0.
-
Tighten screws
Guideline
I
Screw, top triple clamp
Secure the wiring harness with cable holder@).
-
Position the brake caliper. Mount and tighten screws Ci).
Guideline
Screw, front brake caliper
-
Mount the cable tie(s).
-
Position the brake line, wiring harness, and clamp. Mount and tighten screws
Finishing work
-
Install the front fender. (r p. 84)
-
Install the front wheel. (r p. 88)
-
Install the headlight mask with the headlight. (r p. 85)
-
Check that the wiring harness, throttle cables and brake and clutch lines can
move freely and are routed correctly.
-
Check the steering head bearing play. (r p. 34)
-
Remove the motorcycle from the lift stand. (r p. 11)
-
Check the headlight setting. (r p. 118)
I
M20x1.5
17 Nm
MB
(12.5 lbf ft)
M8 25 Nm
(18.4 lbf ft)
33
15 Nm (11.1 lbf ft)
112 Nm (8.9 lbf ft)
Loctite 243
® ™
17 Nm (12.5 lbf ft)
Loctite ® 243
™
G,.