Table of Contents
Advertisement
17
ENGINE
17.3
Engine disassembl
17.3.1
Preparations
" <:"
-
Attach negative cable fl!).
Guideline
Screw, battery terminal
•
Info
I
O
Contact disk
with the claws facing down.
G
-
Remove filler plug
and add engine oil.
I
Engine oil
11.10 I (1.16 qt.)
-
Mount and tighten filler plug
Finishing work
-
Install the main silencer.
-
Install the right side cover.
-
Install the fuel tank.
(a
p. 7 4)
-
Mount the seat.
(!!:!
p. 73)
-
Remove the motorcycle from the lift stand.
-
Refill with coolant.
(a
p. 187)
-
Execute the initialization run.
-
Go for a short test ride.
-
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
-
Check the engine for leak tightness.
-
Check the engine oil level.
-
Check the coolant level.
-
Mount the special tool on the engine mounting block.
Engine fixing arm (77229002000)
Engine assembly stand (61229001000)
-
Mount the engine on the special tool.
•
Info
I
Work with an assistant or a motorized hoist.
M5
must be mounted between screw @D and cable lug Cii)
I
Engine oil (SAE 1 0W/50)
G.
(a
p. 68)
(a
p. 73)
(!!:!
p. 10)
(a
p. 196)
(a
p. 188)
(a
p. 186)
(a
p. 228)
(a
p. 227)
126
2.5 Nm
(1.84 lbf ft)
(a
p. 220)
Advertisement
Table of Contents
