Motorcycle; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Starting - Husqvarna FC 250 2015 Repair Manual

5

MOTORCYCLE

5.1 Raising the motorc cle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
-
Park the vehicle on a firm and level surface.
5.2
Removing the motorc�cle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
-
Park the vehicle on a firm and level surface.
m 5.3

Starting

Danger
Danger of poisoning
-
Always make sure there is sufficient ventilation when running the engine.
-
Use an effective exhaust extraction system when starting or running the engine in an enclosed space.
Note
Engine damage High revving speed with a cold engine negatively impacts the lifespan of the engine.
-
Always run the engine warm at a low speed.
-
Raise the motorcycle at the frame underneath the engine.
I
Lift stand (81329955100)
✓ Neither wheel is in contact with the ground.
-
Secure the motorcycle against falling over.
401942-01
-
Remove the motorcycle from the lift stand.
-
Remove the lift stand.
-
To park the motorcycle, insert plug-in stand
spindle.
Info
Remove the plug-in stand before starting on a trip.
402001-10
Exhaust gases are toxic and inhaling them may result in unconsciousness and death.
-
Remove the plug-in stand.
-
Shift gear to neutral.
Condition
Ambient temperature: < 20 °C (< 68 °F)
-
Pull the cold start button out all the way.
-
Press the electric starter button CD.
•
I
400733-01
(� p. 231)
Info
Press the electric starter button for at most 5 seconds. Wait for a least
5 seconds before trying again.
Fl warning lamp lights up briefly as a functional control when starting.
O
into the left side of the wheel
10