Checking The Play In The Throttle Cable; Adjusting The Play In The Throttle Cable - Husqvarna FC 250 2015 Repair Manual

HANDLEBAR,CONTROLS
7
7.6 in the throttle cable
Preparatory work
-
Remove the seat.
-
Remove the fuel tank.
-
Check the throttle cable routing.
Main work
-
Move the handlebar to the straight-ahead position.
-
Push back sleeves
-
Loosen nut @. Turn adjusting screw @) in as far as possible.
8-
-
Loosen nut
at the throttle grip.
Guideline
I
Throttle cable play
8.
-
Tighten nut
-
Press and hold the throttle grip in the closed setting. Turn adjusting screw @) out
until there is no play in the throttle cable 0).
-
Tighten nut@.
O
-
Push sleeves
Finishing work
-
Check the play in the throttle cable.
-
Install the fuel tank.(� p. 74)
-
Mount the seat.
(� p. 73)
(� p. 73)
(� p. 37)
O.
0
Turn adjusting screw so that there is play in the throttle cable
1 3 ...
on. Check the throttle grip for smooth operation.
(� p. 37)
(!!:! p. 73)
5 mm (0.12 ... 0.2 in)
38