Lubrication System; Oil Circuit; Checking The Engine Oil Level - Husqvarna FC 250 2015 Repair Manual

20

LUBRICATION SYSTEM

20.1

Oil circuit

Oil screen
2 Force pump
3 Oil pressure regulator valve
4 Oil filter
5 Oil nozzle for conrod bearing lubrication
6 Oil nozzle for cam lever lubrication
7
Oil nozzle, piston cooling
Oil nozzle for alternator cooling
8
9 Oil nozzle for clutch lubrication
10 Suction pump
11 Oil channel, transmission lubrication
12 Timing chain tensioner

Checking the engine oil level

Info
The engine oil level can be checked when the engine is cold or warm.
Preparatory work
- Stand the motorcycle upright on a horizontal surface.
Condition
The engine is cold.
- Check the engine oil level.
I
The engine oil reaches the middle of level viewer
If the engine oil does not reach the middle of the level viewer:
- Add engine oil.
Condition
The engine is at operating temperature.
- Check the engine oil level.
• Info
I
After switching off the engine, wait one minute before checking the
level.
The engine oil level is between the middle of the level viewer
upper edge of the level viewer G).
401533-60
e.
(0 p. 191)
188
f)
and the