17.3
Engine disassembl�
17.3.1
Preparations
17.3.2
Removing the clutch push rod
17.3.3
Draining the engine oil
-
Mount the seat.
(�
p. 95)
-
Install the air filter box cover.
-
Remove the motorcycle from the lift stand.
-
Refill with coolant.
(�
p. 240)
-
Execute the initialization run.
-
Go for a short test ride.
-
Read out the fault memory using the Husqvarna Motorcycles
diagnostics tool.
-
Check the engine for leak tightness.
-
Check the engine oil level.
-
Check the coolant level.
-
Mount the special tool on the engine assembly stand.
Holder and fitting for work stand (79229002000)
Engine work stand (80329001000)
-
Mount the engine on the special tool.
Info
Work with an assistant or a motorized hoist.
-
Remove clutch push rod
O
-
Remove plug
with oil screen and the O-rings.
(�
p. 90)
(�
p. 12)
(a
p. 257)
(�
p. 242)
(�
p. 239)
(llt!I
(�
p. 295)
O.
17 ENGINE
..
p. 294)
165