Table of Contents
Advertisement
Troubleshooting RADIUS
Command
Router# clear ssg service service-name
Router# debug ssg ctrl-errors
Router# debug ssg ctrl-events
Router# debug ssg ctrl-packets
Router# debug ssg data
Router# debug ssg data access-list number
Router# debug ssg errors
Router# debug ssg events
Router# debug ssg packets
Troubleshooting RADIUS
To troubleshoot communication between the RADIUS server and SSG, enter the debug radius
command in privileged EXEC mode.
Per-Service Statistics
The Cisco 10000 series router collects statistics about router interfaces and the connections to them in
both the input and output directions. Cisco CLI commands, such as show interface, are used to display
information about the interfaces. SSG commands, such as show ssg connection, are used to display
information about the connection to the router.
Restrictions for Per-Service Statistics
The Per-Service Statistics feature has the following restrictions:
•
•
•
Cisco 10000 Series Router Service Selection Gateway Configuration Guide
12-2
The Cisco 10000 series router does not collect connection level statistics for the default or Open
Garden network.
You cannot display the aggregate statistics for a user.
For PPP-based users, any link level control traffic, such as keepalives, are counted separately from
the data traffic to support idle timeouts.
Purpose
Removes the specified service.
Displays all error messages for control modules.
Displays all event messages for control modules.
Displays packet contents handled by control modules.
Displays all data-path packets.
Displays all data-path packets for the specified access list.
Displays all error messages for system modules.
Displays event messages for system modules.
Displays packet contents handled by system modules.
Chapter 12
Monitoring and Maintaining SSG
OL-4387-02
Advertisement
Table of Contents
