Chapter 10
SSG TCP Redirect
Configuration Examples for SSG TCP Redirect
This section provides the following example configurations:
•
•
•
For more configuration examples, refer to the
module.
Configuration Example for Server Groups
Example 10-3
The server with IP address 10.0.1.4 is the captive portal for all three types of redirection. Port 8090 is
used for user redirection; port 8094 is used for service redirection; and port 8091 is used for initial
captivation.
Example 10-3 Defining a Captive Portal Server Group
Router(config)# ssg enable
Router(config)# ssg tcp-redirect
Router(config-ssg-redirect)# server-group userRedirect
Router(config-ssg-redirect-group)# server 10.0.1.4 8090
Router(config-ssg-redirect-group)# server-group serviceRedirect1
Router(config-ssg-redirect-group)# server 10.0.1.4 8094
Router(config-ssg-redirect-group)# server-group initialCaptivate
Router(config-ssg-redirect-group)# server 10.0.1.4 8091
Configuration Example for Network Lists
Example 10-4
the list named serviceNetwork2 includes network 10.2.2.0; and the list named serviceNetwork3 includes
network 10.3.3.0.
Example 10-4 Defining Network Lists
Router(config)# ssg tcp-redirect
Router(config-ssg-redirect)# network-list serviceNetwork1
Router(config-ssg-redirect-network)# network 10.1.1.0 255.255.255.0
Router(config-ssg-redirect-network)# network-list serviceNetwork2
Router(config-ssg-redirect-network)# network 10.2.2.0 255.255.255.0
Router(config-ssg-redirect-network)# network-list serviceNetwork3
Router(config-ssg-redirect-network)# network 10.3.3.0 255.255.255.0
OL-4387-02
Configuration Example for Server Groups, page 10-7
Configuration Example for Network Lists, page 10-7
Configuration Example for Port Lists, page 10-8
shows how to configure a server group for user, service, and initial captivation redirection.
defines three network lists. The list named serviceNetwork1 includes network 10.1.1.0;
SSG TCP Redirect for Services, Release 12.2(4)B feature
Cisco 10000 Series Router Service Selection Gateway Configuration Guide
10-7