Table of Contents
Advertisement
SSG Enhancements for Overlapping Services
Configuration of Service Translation
To enable service translation on the router, enter the following command in global configuration mode:
Command
Router(config)# ssg service-overlap
Configuration Example for Service Translation
The following example shows how the service translation mechanism translates the services defined in
SESM to sets (for example, service networks). The router uses the sets internally to provide the desired
behavior.
Service Definitions
ssg bind service DEF_256 <next hop ssg>
0.0.0.0/0.0.0.0
ssg bind service A_256 <next hop ssg>
10.16.25.0/255.255.255.0
10.16.26.0/255.255.255.0
ssg bind service B_512 <next hop ssg>
10.16.25.0/255.255.255.0
10.16.26.0/255.255.255.0
10.16.102.1/255.255.255.0
ssg bind service C_2048 <next hop ssg>
10.16.25.0/255.255.255.0
10.16.26.0/255.255.255.0
10.16.102.1/255.255.255.0
ssg bind service D_1024 <next hop ssg>
10.16.25.0/255.255.255.0
Internal Network Sets
Set1
0.0.0.0/0.0.0.0
Set2
10.16.25.0/255.255.255.0
Set3
10.16.26.0/255.255.255.0
Set4
10.16.102.1/255.255.255.0
Services-to-Sets Conversion
Service DEF_256
Set1
Service A_256
Set2 and Set3
Cisco 10000 Series Router Service Selection Gateway Configuration Guide
11-10
Purpose
Enables service translation and indicates to the router to use the
translated sets to provide the desired network behavior.
Chapter 11
Miscellaneous SSG Features
OL-4387-02
Advertisement
Table of Contents
