Error Messages - Cisco 3700 Series Hardware Installation Manual

Error Messages

Table A-4 Cisco 3745 Router Rear-Panel Indicators (continued)
LED Indicator
ETM
NPA
AIM0
and
AIM1

Error Messages

Cisco IOS software displays system error and recovery messages on an external device console terminal
screen. (For more information, see the
page
The terminal should display one of the following prompts:
Router>
or
Router#
The Cisco IOS software checks the system condition once every 30 seconds. If the condition still exists,
the error message appears again; if the error condition has cleared, a recovery message appears.
Table A-5
them.
Table A-5
Note
occur in your router, see the
Panel LEDs" section on page
Cisco 3700 Series Routers Hardware Installation Guide
A-8
State
Off
Amber
Solid green
Not used
Off
Amber
Solid green
3-22.)
(indicates the user EXEC command mode)
(indicates the privileged EXEC command mode)
describes system error and recovery messages and LED conditions that might accompany
does not provide a complete list of system LED conditions. (For all LED conditions that can
"Reading Front-Panel LEDs" section on page A-4
A-6.)
Description
Enhanced timing module (ETM) not present.
ETM present with failure.
ETM present and enabled.
Reserved for future development.
Advanced integration module (AIM) not present.
AIM present with failure.
AIM present and enabled.
"Connecting to a Console Terminal or Modem" section on
Appendix A Troubleshooting
and the "Reading Rear
OL-2180-08