Cisco 3700 Series Hardware Installation Manual page 90

Error Messages
Table A-5 System Error and Recovery Messages (continued)
LED Type LED Color
PS1, PS2, Amber
LED on
power
supply rear
panel
PS1, PS2, Amber
LED on
power
supply rear
panel
Cisco 3700 Series Routers Hardware Installation Guide
A-10
Message
Error:
%PS-3-DCOUTPUTVOLTFAIL: System detected Power System # DC FAIL condition.
Explanation:
The cable connected to the specified DC power supply (1 or 2) is loose, or the DC power
supply has failed.
Recovery:
Check the power supply LEDs to identify the faulty unit.
1.
Power down the faulty power supply and circuit breaker.
2.
Check that cables are seated properly and terminal blocks are wired correctly.
3.
Power up the circuit breaker and the power supply.
4.
If the error condition persists, replace the power supply. (For Cisco 3745 routers, see the
5.
Installing Field-Replaceable Units in Cisco 3745 Routers
For Cisco 3725 routers, see the
Routers hardware configuration note that shipped with the new power supply.)
When the error condition is resolved, the following informational message appears:
%PS-3-DCOUTPUTVOLTOK: Power System DC condition is now normal.
Error:
%PS-3-INPUTVOLTFAIL: System detected Power System # AC FAIL condition.
Explanation:
The cable connected to the specified AC power supply (1 or 2) is loose, or the AC power supply
has failed.
Recovery:
Check the power supply LEDs to identify the faulty unit.
1.
Power down the faulty power supply.
2.
Check that the power cables are seated properly.
3.
Power up the power supply.
4.
If the error condition persists, replace the power supply. (For Cisco 3745 routers, see the
5.
Installing Field-Replaceable Units in Cisco 3745 Routers
For Cisco 3725 routers, see the
hardware configuration note that shipped with the new power supply.)
When the error condition is resolved, the following informational message appears:
%PS-3-INPUTVOLTOK: Power System AC condition is now normal.
Installing Universal DC Power Supplies in Cisco 3725
Installing AC Power Supplies in Cisco 3725 Routers
Appendix A Troubleshooting
hardware configuration note.
hardware configuration note.
OL-2180-08