Connecting To The Auxiliary Port - Cisco 3700 Series Hardware Installation Manual

Connecting to a Console Terminal or Modem

Connecting to the Auxiliary Port

To connect a modem to the auxiliary port on the router, perform the following steps:
Step 1 Use the black RJ-45-to-DB-25 modem adapter cable to connect the router to a modem. (See
and
For information about cable pinouts, see the publication
Specifications
Make sure that your modem and the router auxiliary port are configured for the same transmission speed
Step 2
(up to 115200 bps is supported) and hardware flow control with data carrier detect (DCD) and data
terminal ready (DTR) operations.
Figure 3-26
NM -H DV
BA NK 4
Cisco 3700 Series Routers Hardware Installation Guide
3-24
Figure 3-27.)
on Cisco.com.
Connecting a Modem to the Auxiliary Port on a Cisco 3725 Router
BA NK 3
BA NK 2
BA NK 1
BA NK 0
V0 SEE MAN
UAL BEF
ORE INS
EN TAL LAT ION
AUX port
connector
(RJ-45)
Cisco Modular Access Router Cable
DS U
56K
SEE MAN
UAL BEF DS U
ORE INS
TAL LAT ION
56K
SEE MAN
UAL BEF
ORE INS
TAL LAT ION
Chapter 3 Installing the Router
Figure 3-26
Modem
OL-2180-08