Cisco DFC3B Installation Note page 27

Distributed forwarding card 3 for ws-x67xx modules

Hide thumbs Also See for DFC3B:

Figure 18

Use a Phillips-head screwdriver to install the installation hardware:

Step 7

For the DCFCB and the DFC3BXL daughter cards, install the 8 screws and the 2 standoffs. (See

Figure

For the DFC3C and the DFC3CXL daughter cards, install the 6 screws, 2 cap nuts, and the

1 standoff. (See

You must install all of the installation hardware. The screws provide grounding between the DFC3

Caution

daughter card and the module. Failure to install all of the screws will invalidate the safety approvals and

create a risk of fire and electrical hazard.

You should visually verify that there are standoffs beneath the mounting holes before installing the

Note

installation hardware.

78-15893-08

Seating the DFC3 Daughter Card on the Module

WS-X5530

19.)

Figure

20.)

Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note

Installing the DFC3B and DFC3C Daughter Cards

Apply pressure to bracket.

to seat DFC connectors.

Do not press on heat sinks.

Table of Contents

Dfc3a Dfc3bxl Catalyst 6500 series