Advertisement
Release the two spring clips on either side of the memory module to release it from the socket. (See
Step 3
Figure
Figure 11
Grasp the edges of the memory module with your thumb and forefinger, and gently pull the memory
Step 4
module completely out of the socket.
Memory modules are sensitive components that are susceptible to ESD damage. To prevent ESD
Caution
damage, handle the memory module by the edges only; avoid touching the memory chips, pins, or traces
(the metal fingers along the connector edge of the memory module). (See
78-15893-08
11.)
Releasing the Memory Module Spring Clips
Memory module
Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note
Pull the tabs away with
your thumbs, bracing your
forefingers against the
rails. The memory module
will be released. Then raise
the memory module to
a vertical position.
Upgrading the Ethernet Module Memory
Figure
12.)
21
Advertisement
