Advertisement
Figure 9
Lift here to
unseat DFC
power connector
Upgrading the Ethernet Module Memory
When you upgrade your Ethernet module with either a DFC3BXL or DFC3CXL daughter card, you must
also install a 1-GB memory upgrade (part number MEM-XCEF720-1GB) on the Ethernet module. This
1-GB memory upgrade is included with your DFC3BXL or DFC3CXL upgrade kit and installs on the
Ethernet module in a small-outline dual-inline memory module (SODIMM) chip socket located
underneath the DFC daughter card.
You must perform the memory upgrade procedure after you remove the CFC or the DFC daughter card
Note
from the Ethernet module and before you install either the DFC3BXL or DFC3CXL daughter card
upgrade.
78-15893-08
Removing the DFC3 Daughter Card (WS-X6748-GE-TX Equipped with a Front Stiffener
Bracket)
Stiffener
bracket
WS-X5530
Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note
Upgrading the Ethernet Module Memory
Stiffener bracket tabs
19
Advertisement
