Connect Ac Power - Cisco AS5400 Quick Start Manual

Alarm Pinouts
1
Pin Description
1 Normally open
2 Pole
3 Normally closed
1. The pins are numbered from left to right (facing the back of
the chassis), starting with pin 1.

Connect AC Power

Step 1 Connect the black power cord to the receptacle on the power supply at the rear of the universal gateway.
Connecting AC Power Cord to Cisco AS5350 Single Power Supply
Note For the Cisco AS5350 redundant power supply, use the special power cable that came with your universal gateway.
Connecting AC Power Cord to Cisco AS5350 Redundant Power Supply
The Cisco AS5350 redundant power supply is supported in Cisco IOS Release 12.2{2)XB5 or later releases.
Note
26
Power switch
Power switch
Power cables