Checking The Past Histories; Checking The Error Histories - Makita DRC300 Instruction Manual

Checking the past histories

Up to 15 histories can be recorded. If 15 histories have already been recorded, the
oldest history will be erased when a new history is recorded.
1. On the home screen, tap on in [LATEST HISTORY].
You can tap on on the home screen and then tap on [Cleaning History] to
see the past records.
2. Tap on the record you want to check.
1
2
3
1. Cleaned room or cleaning mode 2. Time during which the room was
cleaned 3. Cleaning status (complete, stopped, error, etc.)
Tapping on an article shows the detail information of each history.
• Blue -green dash line: The trajectory of the robotic cleaner
• Yellow: The area that the robotic cleaner has cleaned
• Blue: Obstacles detected by bumper sensor
• Green: Obstacles detected by the ultra -sonic sensor
• Pink: Steps detected by the cliff sensor
• Purple: The area that the robotic cleaner has detected the magnetic boundary
line
• White: The area that the robotic cleaner has not cleaned
• Gray: The walls or obstacles detected by LiDAR sensor
1. Cleaned area size 2. Cleaning coverage (mapping cleaning only)
• The size and coverage of the cleaned area are not precise values. Use this
information as a rough guide.

Checking the error histories

1. On the home screen, tap on
2. Tap on [Notification History].
The date, time, and content of the error will be displayed. Up to 10 histories can
be recorded. If 10 histories have already been recorded, the oldest history will be
erased when a new history is recorded.
1
2
37 ENGLISH
.