Cleaning Mapped Rooms - Makita DRC300 Instruction Manual

3. On the home screen, tap on [Cleaning Start] for the robotic cleaner to start
cleaning.
4. You can control the robotic cleaner with the following operations.
• Tapping on [Pause] results in the robotic cleaner stopping cleaning
temporarily.
• Tapping on [Resume] while paused restarts the robotic cleaner.
• Tapping on [Go to Home] while paused results in the robotic cleaner going
back to the point where it started cleaning. As the robotic cleaner goes back
to the starting point, the app goes to the home screen. This operation can be
performed while the cleaning is paused.

Cleaning mapped rooms

• In mapping cleaning mode, the robotic cleaner works so that a mapped room
is cleaned efficiently.
• The use of mapping cleaning mode requires mapping information to be
registered. (See page 38.)
1. On the home screen, tap on
2. Tap on the room you want to clean, then tap on [OK].
• You can add, change, and delete a map. (See page 38)
3. Place the robotic cleaner as close as possible to the same orientation as at
the start of mapping.
This allows the robotic cleaner to start cleaning smoothly.
4. Tap on [Cleaning Start] for the robotic cleaner to start cleaning.
35 ENGLISH
.