Makita DRC300 Quick Start Manual

Name of Each Part
Robotic Cleaner (operation panel (display)
10
9
*For details, refer to the instruction manual of the robotic cleaner.
1. Time indicator (green)
2. Sound lamp (green)
3. Vacuum fan lamp (green)
4. Boundary-sensing lamp (green)
5. Confirmation button
Remote control
1. Power OFF button
8
1
2. Action buttons
3. Start/stop button
2
4. Location beacon buzzer/light button
3
5. Sound ON/OFF button
6. Vacuum fan ON/OFF button
4
7. Shift button*
5
7
8. Start point button
6
* While pressing this button, press the
action button to make the robotic cleaner
move backward.
Putting batteries in the remote control
To prevent the robotic cleaner from falling
• Refrain from using the robotic
cleaner on a mezzanine floor, a
loft, a stairwell, a place without
walls, or a place with a slope of
10° or more.
• In places where the robotic
cleaner may fall, set up a wall
( 2 5 c m ( 9 - 7 / 8 " ) o r m o r e i n
height) that cannot be moved or
tipped over even if it is hit by the
robotic cleaner.
• If dirt or water droplets stick to
the cliff sensor* on the underside
of the robotic cleaner, wipe them
off with a dry, soft cloth, a cotton
swab, etc.
Quick Start Guide
1 2
8 7
6. Next button
7. Up button, down button
8. Start/stop button
9. Mode switch button
10. Mode/room number display
*
*
*
Assembly
Attaching the side brushes
Spread out a mat, place the robotic cleaner on it upside down, and attach
the 2 side brushes on the left and right.
1
3
4
5
6
3
Removing the packing material from inside
the robotic cleaner
1
3
5
Click
*
1 MAKITA CORPORATION | makita.ca | 1950 FORBES STREET, WHITBY, ON. L1N 7B7
885891A933 CRE
Robotic cleaner
DRC300
ENGLISH
2
4
Click
2
4