Table of Contents
Advertisement
SECTION 6: MAINTENANCE
Compressor will turn ON
automatically when pres-
sure switch is set to ON.
To reduce risk of shock/
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Eye injury hazard! Always
wear safety glasses when
maintaining pressurized air
system.
Do not touch compressor
head or discharge line
during use or immediately
after compressor is active.
These hot parts may cause
burns. Allow compressor
to cool before handling.
Do
cleanser to clean machine.
Compressor components
often produce sparks that
could ignite once machine
is connected to power and
turned ON.
-24-
not
use
flammable
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Low oil level.
•
Damaged safety relief valve, pressure switch,
or drain valve.
•
Worn or damaged wires, cords, and plugs.
•
Tank rust/corrosion.
•
Any other unsafe condition.
Daily Maintenance
•
Open drain valve to drain any condensation.
•
Check oil level.
•
Test function of safety relief valve and clear
any obstructions.
Releasing air through safety relief valve or
drain valve can be extremely loud. Protect
hearing
with
ANSI-approved
protection when testing/draining valves.
Weekly Maintenance
•
Check air filter.
•
Clean/vacuum dust buildup off compressor.
Quarterly (3 Month/500 Hour) Maintenance
•
Change compressor oil.
Semi-Annual (6 Month) Maintenance
•
Check hoses/connections for leaks. If soapy
water at suspected leak creates bubbles, air
is escaping. Repair or replace affected parts.
Model T32338 (Mfd. Since 12/20)
hearing
Advertisement
Table of Contents
