Table of Contents
Advertisement
Site Considerations
Workbench Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
Some workbenches may require additional rein-
forcement to support the weight of the machine
and workpiece materials.
Placement Location
Consider anticipated workpiece sizes and addi-
tional space needed for auxiliary stands, work
tables, or other machinery when establishing a
location for this machine in the shop. Below is
the minimum amount of space needed for the
machine.
=
Electrical Connection
Wall
Min. 18" from
Obstructions
19"
Figure 8. Minimum working clearances.
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
-14-
19"
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble machine:
1.
Remove and discard air intake plug shown in
Figure 9.
Air Intake
Plug
Figure 9. Location of air intake plug.
2.
Thread air filter assembly clockwise into air
intake hole (see Figure 10) and hand tighten.
Air Filter
Assembly
Figure 10. Air filter assembly installed in air
intake hole.
Note: If motor cover prevents this step, loos-
en wing nut on filter assembly, fully thread
filter base into hole, then tighten nut.
Model T32338 (Mfd. Since 12/20)
Advertisement
Table of Contents
