ENGLISH (Original instructions) WARNING This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capa- bilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Clean the water level limiting device regularly Noise and examine it for signs of damage. Do not use the cleaner without the filter. The typical A-weighted noise level determined accord- Replace a damaged filter immediately. ing to 60335-2-69: AVOID UNINTENTIONAL STARTING. Be sure Model DVC862L switch is OFF when installing battery(ies).
Page 8
SAVE THESE INSTRUCTIONS. causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and WARNING: DO NOT let comfort or familiarity charger.
FUNCTIONAL Indicator lamps Remaining capacity DESCRIPTION Lighted Blinking 75% to 100% CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed 50% to 75% before adjusting or checking function on the tool. 25% to 50% Installing or removing battery cartridge 0% to 25%...
Overload protection Locking or unlocking the caster When the tool is operated in a manner that causes it to ► Fig.7: 1. Caster 2. Stopper lever 3. FREE position draw an abnormally high current, the tool automatically 4. LOCK position stops without any indication.
Mount the damper on the powder filter and then Remove the rubber holder. place them in the prefilter with aligning the mounting ► Fig.14: 1. Rubber holder position markings. Extend the paper pack. Finally, mount the tank cover and lock it. Align the paper pack opening with the dust suction ►...
38 mm inner diameter be performed by Makita Authorized or Factory Service hose (optional accessory). Using the 28 mm inner Centers, always using Makita replacement parts.