14. Rotate spindle speed dial all the way coun-
terclockwise, then press Emergency Stop
button.
15. Repeat Steps 7–10 from Lathe Spindle
Break-In in a similar manner for mill.
Congratulations! Mill spindle break-in is complete.
-30-
Recommended
Adjustments
The following adjustments have been made at the
factory. However, because of the many variables
involved with shipping, we recommend you verify
these adjustments to ensure the best results:
Factory adjustments that should be verified:
Tailstock alignment ........................ Page 39
•
Cross slide backlash adjustment .....Page 82
•
Leadscrew backlash ........................Page 82
•
Gib adjustments ............................. Page 83
•
Model G0768/G0769 (Mfd. Since 8/15)