Related Manuals for Makita M9003G
Summary of Contents for Makita M9003G
- Page 1 INSTRUCTION MANUAL Angle Grinder M9002 M9003 015065 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model M9002 M9003 Depressed center wheel diameter 125 mm 150 mm Max. wheel thickness 6 mm Spindle thread M14 or 5/8" (country specific) Rated speed (n) / No load speed (n 11,000 min 10,000 min Overall length 361 mm 361 mm Net weight... - Page 3 EC Declaration of Conformity Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any Makita declares that the following Machine(s): adapter plugs with earthed (grounded) power Designation of Machine: tools. Unmodified plugs and matching outlets will Angle Grinder reduce risk of electric shock.
-
Page 4: Grinder Safety Warnings
Personal safety 22. Maintain power tools. Check for misalignment Stay alert, watch what you are doing and use or binding of moving parts, breakage of parts common sense when operating a power tool. and any other condition that may affect the Do not use a power tool while you are tired or power tool’s operation. - Page 5 Threaded mounting of accessories must 13. Do not run the power tool while carrying it at match grinder spindle thread. your side. Accidental contact with the spinning accessories mounted by flanges, the arbour accessory could snag your clothing, pulling the hole of the accessory must fit the locating accessory into your body.
- Page 6 Safety Warnings Specific for Grinding Operation: 24. Do not touch the workpiece immediately after a) Use only wheel types that are recommended operation; it may be extremely hot and could for your power tool and the specific guard burn your skin. designed for the selected wheel.
-
Page 7: Functional Description
To stop the tool from the locked position, pull the switch FUNCTIONAL DESCRIPTION trigger fully, and then release it. ASSEMBLY CAUTION: Always be sure that the tool is switched off and • unplugged before adjusting or checking function CAUTION: on the tool. Always be sure that the tool is switched off and •... -
Page 8: Operation
Installing or removing depressed center CAUTION: grinding wheel/Multi-disc Never switch on the tool when it is in contact with • the workpiece, it may cause an injury to operator. (optional accessory) Always wear safety goggles or a face shield during •... - Page 9 Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
- Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885412-222...