Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita M9100B
Summary of Contents for Makita M9100B
- Page 1 INSTRUCTION MANUAL Die Grinder M9100 DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: M9100 Max. collet capacity 6 mm or 6.35 mm (1/4″) Max. wheel point size Max. wheel diameter 20 mm Max. mandrel (shank) length 46 mm Rated speed (n)/No load speed (n 33,000 min Overall length 350 mm Net weight Without cover 1.4 kg With cover... - Page 3 Use the power tool, accessories and tool bits Personal Safety etc. in accordance with these instructions, tak- Stay alert, watch what you are doing and use ing into account the working conditions and common sense when operating a power tool. the work to be performed.
- Page 4 Wear personal protective equipment. Kickback and Related Warnings Depending on application, use face shield, Kickback is a sudden reaction to a pinched or snagged safety goggles or safety glasses. As appro- rotating accessory. Pinching or snagging causes rapid priate, wear dust mask, hearing protectors, stalling of the rotating accessory which in turn causes gloves and workshop apron capable of stop- the uncontrolled power tool to be forced in the direction...
-
Page 5: Functional Description
Observe the instructions of the manufacturer Installing or removing wheel point for correct mounting and use of wheels. Handle and store wheels with care. CAUTION: Use the correct size collet cone for Check that the workpiece is properly supported. the wheel point which you intend to use. 10. -
Page 6: Operation
► 1. Brush holder cap To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Turn the tool on without the wheel point making any contact with the workpiece and wait until the wheel point attains full speed. - Page 8 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885488A938 www.makita.com 20160621...