Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita M9512
Summary of Contents for Makita M9512
- Page 1 INSTRUCTION MANUAL Angle Grinder M9512 M9513 DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: M9512 M9513 Wheel diameter 100 mm Max. wheel thickness 4 mm Spindle thread Rated speed (n)/ No load speed (n 11,000 min Overall length 258 mm 273 mm Net weight 1.6 kg 1.8 kg Safety class • Due to our continuing program of research and development, the specifications herein are subject to change without notice. -
Page 3: Grinder Safety Warnings
When operating a power tool outdoors, use an Maintain power tools. Check for misalignment extension cord suitable for outdoor use. Use of or binding of moving parts, breakage of parts a cord suitable for outdoor use reduces the risk of and any other condition that may affect the electric shock. - Page 4 Do not use a damaged accessory. Before each For example, if an abrasive wheel is snagged or use inspect the accessory such as abrasive pinched by the workpiece, the edge of the wheel that is wheels for chips and cracks, backing pad for entering into the pinch point can dig into the surface of cracks, tear or excess wear.
-
Page 5: Functional Description
Additional Safety Warnings: FUNCTIONAL When using depressed centre grinding wheels, be sure to use only fiberglass-reinforced DESCRIPTION wheels. NEVER USE Stone Cup type wheels with this grinder. This grinder is not designed for these CAUTION: Always be sure that the tool is types of wheels and the use of such a product switched off and unplugged before adjusting or may result in serious personal injury. - Page 6 Installing or removing depressed ASSEMBLY center wheel CAUTION: Always be sure that the tool is Optional accessory switched off and unplugged before carrying out any work on the tool. WARNING: When using a depressed center wheel, the wheel guard must be fitted on the tool Installing side grip (handle) so that the closed side of the guard always points toward the operator.
-
Page 7: Operation
(handle). carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Grinding and sanding operation Makita Authorized or Factory Service Centers, always using Makita replacement parts. Turn the tool on and then apply the wheel or disc to the workpiece. In general, keep the edge of the wheel or disc at an angle of about 15°... - Page 8 Makita Corporation 885568-5 20161129 www.makita.com...