Setting Qos Parameters - Huawei TE80 Administrator's Manual

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Parameter
SNMPv3 Authentication Information
User name
User rights
Authenticati
on protocol
Current
password
New
password
Encryption
protocol
Encryption
password

13.5 Setting QoS Parameters

Quality of service (QoS) settings determine the mode for processing IP data packets during a
conference.
Choose Advanced > Settings > Network > QoS. Set the QoS parameters described in
13-5.
Parameter
QoS type
Issue 02 (2014-03-30)
Description
Trap version is set to v3 trap or v3
inform.
Specifies the user name for connecting
your endpoint to the videoconferencing
network management system through
SNMPv3.
Specifies the user permissions of your
endpoint when it connects to the
videoconferencing network management
system.

Read and write:read and write
 Read only: read-only
Specify the authentication mode and
password for connecting the
videoconferencing network management
system to your endpoint.
Specify the encryption protocol and
password for connecting the
videoconferencing network management
system to your endpoint. Available
encryption protocols are DES, AES, and
No encryption.
Table 13-5 QoS parameters
Description
Specifies the type of the Quality of Service
(QoS) network security measure used to
deal with the network latency, congestion,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 Feature Configuration
Setting
The default value is v3user.
The default value is Read and
write.
The default value of
Authentication protocol is
MD5.
When the videoconferencing
network management system
attempts to connect to your
endpoint, Authentication
protocol and New password
set on your endpoint are
required.
The default value of
Encryption protocol is DES.
Set Encryption password to a
string of 32 characters or less,
consisting of letters, digits, and
special characters.
Setting
The default value is
Priority.
Table
145