Huawei TE80 Administrator's Manual page 58

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Procedure
Step 1 Choose Advanced > Settings > Video > Video Input. Set the video input parameters
described in
Parameter
Name
Camera type
Serial port
Initial
position
Moving
speed
Input source
Mirroring
Issue 02 (2014-03-30)
Table 4-14.
Table 4-10 Video input parameters
Description
Specifies the video input port name to
help you identify ports during a
conference.
Specifies the type of the camera
connected. The endpoint supports
cameras of multiple manufacturers and
models.
Specifies the serial port that is connected
to the camera control interface. You can
select either COM1 or COM2.
Specifies the position of the camera after
startup.

Auto: The camera moves to its initial
position after startup.
 Preset 1: The camera moves to the
preset after startup.
NOTE
Each camera preset stores the pan, tilt, and
zoom settings of the camera. For how to set
presets, see 4.6 Setting Camera
Specifies the movement and zoom speed
for the camera at your site.

Select Slow for accurate positioning.

Select Fast for quick positioning.
 Select Medium for medium paced
positioning.
Specifies the input source format.
Specifies whether the endpoint displays a
reflection of an input video, wherein the
right and left sides of the original are
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Display Device and Camera
Setting
Do not leave this parameter
blank.
Enter a string of 1 to 64
characters.
The default value is
VPC600/VPC620.
The control commands vary
with different cameras.
Therefore, select the camera
type correctly to ensure that the
camera can be controlled
properly.
The default value for the 1
MAIN IN port is COM2 while
that for other video input ports
is None.
Select the serial port that is
being used. Otherwise, the
camera cannot be controlled.
The default value is Auto.
Presets.
The default value is Medium.
The default value is Auto.
The default value is Normal.
50