Huawei TE80 Administrator's Manual page 49

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Video
Resolution
720p
1080i
1080p
Procedure
Step 1 Choose Advanced > Settings > Video > Common Settings > Video Output. Set the
common video output parameters described in
Parameter
GUI
Caption output
Main output
interface
Auxiliary
output port
Presentation
display
Issue 02 (2014-03-30)
Refresh Rate (Hz)
 60, if the output mode is VGA
 50 or 60, if the output mode is DVI, YPbPr, or HDMI
50 or 60
 60, if the output mode is VGA
 24, 25, 30, 50, or 60, if the output mode is DVI, YPbPr, or HDMI
Table 4-6 Common video output parameters
Description
Specifies the video output port for the
remote controlled UI.
During a conference, you can configure
your endpoint to display video on one
display and the remote controlled UI on
another display by setting this parameter
to a value different from the value of
Main output interface.
Specifies the video output port for
captions.
NOTE
This parameter takes effect only when the
caption type is set to T.140.
Specifies the main output port.
Only the main output port supports
combined picture output. For details
about the combined picture function.
Specifies the auxiliary output port for
preferentially displaying presentation.
Specifies whether the endpoint displays
the video and presentation on separate
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Display Device and Camera
Table 4-8.
Setting
The default value is 1
MAIN OUT.
The default value is 1
MAIN OUT.
The default value is 1
MAIN OUT.
To ensure good video
quality, retain the default
value.
The default value of TE80
is 2 PC OUT.
The default value of TE40
or TE50 is 2 HDMI OUT.
Do not set Main output
interface and Auxiliary
output port to the same
output port.
The default value is
Disable.
41