Huawei TE80 Administrator's Manual page 146

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Parameter
Answer Mode
Mute local
audio for
answered calls
.
Open do not
disturb right
Call parameter
configuration
Wi-Fi network
preferred
Default call
bandwidth
Issue 02 (2014-03-30)
Table 13-2 Parameters for placing and answering calls
Description
Specifies how your endpoint handles
incoming calls.
 Manual: Your endpoint prompts you to
handle a call when the call comes in.

Answer call automatically: Your
endpoint automatically answers
incoming calls when not being used in a
conference.
This parameter is available only when
Answer Mode is set to Answer call
automatically.
Specifies whether the endpoint turns off all
sounds generated at your site when your
endpoint joins a conference. If you enable
this parameter, no remote site can hear your
site.
Specifies whether the do-not-disturb
function is available to all users.
If you enable this parameter, under
Advanced > Utilities, common users can
enable or disable the do-not-disturb
function. The do-not-disturb function
prevents you from being disturbed by
incoming calls.
Specifies whether you can set the call type
and data transmission rate before initiating
point-to-point calls. If you select this
parameter, you can set the call type and
data transmission rate in the displayed
dialog box before initiating a point-to-point
call. If you do not select this parameter, the
endpoint uses the default call type and data
transmission rate.
Specifies whether to prioritize a Wi-Fi
network when both wireless and wired
networks are available.
This parameter is available only when
Wi-Fi is enabled. For details about how to
enable Wi-Fi, see
Parameters.
Specifies the default data transmission rate
for your endpoint.
NOTE
If this parameter is set incorrectly, the video
quality will be affected or the call might even
fail to be set up.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3.1.5 Setting Wi-Fi
13 Feature Configuration
Setting
The default value is
Manual.
This parameter is not
selected by default.
This parameter is selected
by default.
This parameter is not
selected by default.
This parameter is not
selected by default.
The default value is 1920
kbps.
138