Setting Qos Parameters - Huawei TE30 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Step 3 Select Save.
In the Connected devices list box, you can view the MAC and IP addresses of all the devices
connected to your TE30.
----End

3.5 Setting QoS Parameters

Quality of service (QoS) settings determine the mode for processing IP data packets during a
conference.
Procedure
Step 1 Choose Advanced Settings > Settings > Security > QoS. Set the QoS parameters by referring
to Table
Table 3-5 QoS parameters
Parameter
QoS type
IP priority
Issue 01 (2013-03-27)
3-5.
Description
Specifies the QoS type.
l Priority: If you select this option, you
must also set IP priority and Service
type.
l DiffServ: If you select this option, you
must also set DSCP. DSCP stands for
differentiated services code point.
Specifies the priority that a network
device gives to forwarding the data
packets sent by your TE30. A larger value
indicates a higher priority.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
The default value is Priority.
Value range: 0-7
The default value is 7.
3 Network
23