Setting Network Diagnostics Parameters - Huawei TE80 Administrator's Manual

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide

13.6 Setting Network Diagnostics Parameters

Correct settings on the ports used for diagnostics enable you to use a network diagnostics tool
to diagnose your endpoint using the ports.
Choose Advanced > Settings > Network > Network diagnostics. Set the network
diagnostics parameters described in
Parameter
Network
diagnostics
H.323 call
port
RAS source
port
RAS
destination
port
SIP call port
Test network
after exiting
conference
Issue 02 (2014-03-30)
You can use a network diagnostics tool to diagnose your endpoint only when the endpoint is not used in
any conferences.
Table 13-6 Network diagnostics parameters
Description
Specifies whether to enable the
Registration, Admission and Status
(RAS) ports, H.323 call port, and
Session Initiation Protocol (SIP) port to
be used for network diagnostics.
Specifies the port the network
diagnostics tool uses to receive and send
call signaling during communication
with your endpoint.
Specifies the port your endpoint uses to
receive and send RAS signaling during
communication with the network
diagnostics tool.
Specifies the port the network
diagnostics tool uses to receive and send
RAS signaling during communication
with your endpoint.
Specifies the port your endpoint uses to
send SIP signaling during
communication with the network
diagnostics tool.
Specifies whether to perform the ping
operation after your endpoint exits a
conference. Ping results are recorded in a
log.
Log in to the web interface of the endpoint, choose System Settings > Network > Network diagnostics
to set Diagnostics tool user name and Diagnostics tool password. The default value of Diagnostics
tool user name and Diagnostics tool password are admin and Change_Me respectively.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 13-6.
13 Feature Configuration
Setting
The default value is Disable.
The default value is 1820.
The default value is 1819.
The default value is 1819.
The default value is 5160.
The default value is Enable.
147