Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DA333
Summary of Contents for Makita DA333
- Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Makita DA333 DA333DZ o cerca il tuo prodotto tra le migliori offerte di Elettroutensili INSTRUCTION MANUAL Cordless Angle Drill DA332D DA333D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DA332D DA333D Drilling capacities Steel 10 mm Wood 12 mm No load speed 0 - 1,100 min Overall length 313 mm - 332 mm Rated voltage D.C. 10.8 V - 12 V max Battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B Net weight 1.2 - 1.3 kg 1.2 - 1.4 kg... -
Page 3: General Power Tool Safety Warnings
Use personal protective equipment. Always SAFETY WARNINGS wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions General power tool safety warnings will reduce personal injuries. Prevent unintentional starting. Ensure the WARNING: switch is in the off-position before connecting Read all safety warnings, instruc- to power source and/or battery pack, picking tions, illustrations and specifications provided with this... - Page 4 Disconnect the plug from the power source Follow all charging instructions and do not and/or remove the battery pack, if detachable, charge the battery pack or tool outside the from the power tool before making any adjust- temperature range specified in the instruc- ments, changing accessories, or storing power tions.
-
Page 5: Tips For Maintaining Maximum Battery Life
CAUTION: Always install the battery cartridge causing fires, personal injury and damage. It will fully until the red indicator cannot be seen. If not, also void the Makita warranty for the Makita tool and it may accidentally fall out of the tool, causing injury to charger. you or someone around you. Tips for maintaining maximum... -
Page 6: Switch Action
Low battery voltage: Indicating the remaining battery The remaining battery capacity is too low and the tool capacity will not operate. If you turn the tool on, the motor does not run or the motor runs again but stops soon. In this Only for battery cartridges with the indicator situation, remove and recharge the battery. - Page 7 For model DA333D ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing drill bit Optional accessory For model DA332D ► 1 . Lamp Pull the switch lever to light up the lamp. The lamp keeps on lighting while the switch lever is being pulled.
-
Page 8: Installing Hook
Installing hook OPERATION CAUTION: Always insert the battery cartridge all the way until it locks in place. If you can see the red indicator on the upper side of the button, it is not locked completely. Insert it fully until the red indicator cannot be seen. -
Page 9: Drilling Operation
When drilling in wood, the best results are obtained CAUTION: These accessories or attachments with wood drills equipped with a guide screw. The guide are recommended for use with your Makita tool screw makes drilling easier by pulling the drill bit into specified in this manual. The use of any other the workpiece. accessories or attachments might present a risk of Drilling in metal injury to persons. Only use accessory or attachment... - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885606-229 www.makita.com 20170508...