Makita DA330D Instruction Manual
Cordless angle drill
Hide thumbs
Also See for DA330D:
- Instruction manual (53 pages) ,
- Instruction manuals (41 pages) ,
- Technical information (10 pages)
Related Manuals for Makita DA330D
Summary of Contents for Makita DA330D
- Page 1 INSTRUCTION MANUAL Cordless Angle Drill DA330D DA331D 013258 IMPORTANT: Read Before Using.
-
Page 2: Specifications
) : 70 dB(A) or less Uncertainty (K) : 3 dB(A) Makita Corporation responsible The noise level under working may exceed 80 dB(A) manufacturer declare that the following Makita machine(s): Wear ear protection Designation of Machine: Cordless Angle Drill Model No./ Type: DA330D, DA331D... - Page 3 The technical documentation is kept by: Do not abuse the cord. Never use the cord for Makita International Europe Ltd. carrying, pulling or unplugging the power tool. Technical Department, Keep cord away from heat, oil, sharp edges or Michigan Drive, Tongwell, moving parts.
- Page 4 Power tool use and care Service 17. Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical power tool will do the job better and safer at the replacement parts.
-
Page 5: Functional Description
ENC009-1 FUNCTIONAL DESCRIPTION IMPORTANT SAFETY INSTRUCTIONS CAUTION: Always be sure that the tool is switched off and the • FOR BATTERY CARTRIDGE battery cartridge is removed before adjusting or Before using battery cartridge, read all checking function on the tool. instructions and cautionary markings on (1) Installing or removing battery cartridge battery charger, (2) battery, and (3) product... - Page 6 A side for clockwise rotation or from the B side for Lighting up the front lamp counterclockwise rotation. For model DA330D When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. 1. Lamp...
-
Page 7: Drilling Operation
Chuck key holder ASSEMBLY For model DA330D CAUTION: 1. Chuck key Always be sure that the tool is switched off and the holder • battery cartridge is removed before carrying out 2. Hook portion 3. Slot any work on the tool. -
Page 8: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits • Chuck key • Chuck key holder •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 885179-222...