Hydraulic Oils And Lubricants - Buffalo Benelli Classica Series Instruction Manual

To increase the service life of the bike, clean the bike chains regularly and lubricate the chain.
The chain should be lubricated at each of the links. You can turn the crank counter clockwise
while lubricating each area of pivot.
Have the chain replaced by a professional bike workshop once its wear limit has been
reached.
Lubricating is always at the point where 2 surfaces touch together and friction is created. Your
local neighborhood bicycle shop or most mass merchants who sell bicycles will offer various
types of lubes for your bicycle
Chain Rings, Sprocket Wheels, and Jockey Wheels
In bikes with derailleur gears, the sprocket wheels, chain rings and jockey wheels are subject
to function-related wear. The extent of the wear depends on care/maintenance and how the
bike is used (mileage, rain, dirt, salt, etc.).
To increase the service life of the bike, you should clean and lubricate these parts regularly.
Have them replaced by a professional bike workshop once their wear limit has been reached.
Headlights & Taillights
Bulbs and other lamps are subject to function-related wear and therefore may need to be
replaced. In case you need to replace damaged bulbs, always carry spare ones with you.
Handlebar tapes and handle grips
Handlebar tapes and handle grips are subject to function related wear and therefore may need
to be replaced. Check regularly that the handles are securely seated.

Hydraulic oils and lubricants

The effectiveness of hydraulic oils and lubricants decreases over time. If lubricants are not
replaced, this increases the wear of the relevant components and bearings.
Clean and reduplicate all relevant components and bearings regularly.
Have the brake fluid for disc brakes checked regularly, and replaced if necessary.
41