Check The Following Before Each Ride - Buffalo Benelli Classica Series Instruction Manual

8.) Check The Lights
To turn on front headlight twist power shifting handle forward for about 2 seconds and return
to original position. Front headlight should now be turned on. When ready to turn headlight off,
twist power shifting handle forward again for 2 seconds and return to original position.

CHECK THE FOLLOWING BEFORE EACH RIDE:

Make sure the battery is fully charged and locked in the rear bike rack.
Check tire pressure and wheel condition. Make sure wheel quick release are firmly closed.
Check the drive chain condition. Make sure it is clean and well lubricated.
Check the bicycle front and rear lighting to make sure it works properly.
Check the bicycle brakes, make sure they are working well.
Inspect condition of electrical cables so that cables are kinks free and no signs of abrasive
wear.
Check the fork for damage (fork legs, fork boot, crown, dropouts, accessories/brake mounts,
fender attachment)
Look for damage (e.g., loose parts, cracks, deep scratches, dents)
Make sure the fork works properly. Things that can indicate a serious problem are any
unusual "clunking" or knocking noises, changes in travel , an over extended or compressed
boot, any changes in the way the fork has been working, or any leaking fluids.
Frame
The form of the frame depends on the bike type and function. Frames are manufactured from
different materials – steel or aluminum alloys or carbon (carbon fiber), for example. Both the
Benelli CLASSICA26 and CLASSICA28 are made from alloy and are fixed position that cannot
be adjusted.
NOTE:
The frame number of the bike is stamped on the seat tube, the head tube or the
bottom bracket housing. It may also be found on the motor suspension. If stolen the Benelli
eBike can be identified by the frame number. To identify the bike properly, it is important to
note down the whole number in the right order.
14