Installation, Relocation And After-Sale Technical Service - Hitachi U-5100 Instruction Manual

Installation, Relocation and After-sale Technical Service

(1) Installation and Relocation
(a) Installation at delivery shall not be carried out by the
user. It shall be carried out by our sales
representative or the engineers who have been
trained and qualified for this purpose by us in order to
use the instrument safely and accurately.
(b) Before installation, the user shall make preparations
for satisfying the installation requirements in
accordance with this instruction manual.
(c) If relocation becomes necessary after initial
installation (delivery), please contact the dealer from
whom you purchased the instrument or our sales
representative.
(2) After-sales Service
(a) For after-sales service, contact our sales
representative or service office of our sales
representative.
(b) For service after the warranty period, consult our
sales representative or service office of our sales
representative with regard to a maintenance and
inspection service contract.
(c) The maintenance parts and consumables of the
instrument will be provided for 10 years after its
delivery. If a part or unit is unavailable due to the
discontinuance of its manufacture, a substitute part
or unit may be supplied, for which we request your
understanding. Even after the instrument has
reached its useful life, the parts and units will be
supplied where they are available, but this will not
assure an extension of the useful life.
In the case that the maintenance parts and
consumables are unavailable after a lapse of 10
years, please stop using the instrument and replace
the instrument with a new one.
Gas leak, water leak, electrical leak or ignition may
be caused if the instrument is used without
maintenance.
IMPORTANT - 6