Check Of Contents; Check Of Power Voltage And Fuse - Hitachi U-5100 Instruction Manual

1.4 Check of Contents

1.5 Check of Power Voltage and Fuse

After unpacking, check the contents against the packing list.
If any part is missing or damaged, or if you have a question,
contact the dealer from whom you purchased the instrument.
Electric Shock due to Dangerous Voltage
An electric shock due to power voltage could result in death
or serious injury. Before connecting the power cord, make
sure that the power switch of the spectrophotometer main
unit is turned off.
Also, absolutely avoid disassembling or modifying the
instrument.
Check that the power line voltage to be applied meets the
operating voltage requirement of the spectrophotometer which is
indicated near its power connector.
Fig. 1-2 Power Connector Section at Instrument Rear
Referring to section 6.6, check if a fuse having the capacity
indicated in Table 1-1 is used.
Table 1-1 Fuse Capacity and Part No.
Fuse Capacity
2 A (time lag)
1 - 5
WARNING
Fuse holder
Part No.
J821391
1.4