Data Tracing (Wavelength/Time Scan Data) - Hitachi U-5100 Instruction Manual

4.3 Data Processing

4.3.6 Data Tracing (Wavelength/Time Scan Data)

1. Displaying Data
[For check from saved data]
For check by opening the saved data, open the saved
wavelength scan data or time scan data according to
section 4.1.1..
[During measurement]
When measurement is in progress with WL Scan or Time
Scan selected in Main Menu, you should wait till the end of
the measurement. For stopping the measurement, press
the [STOP] key.
2. Data Processing Screen
(1) For wavelength scan data, the WL Scan screen (Fig. 4-
42) appears, and the Time Scan screen (Fig. 4-43)
appears for time scan data. Then, select the <1> key
(for Data).
WL Scan
0.800
ABS
0.000
START:Meas.; Select function.：_
[1]Data [2]Scale [3]Save [4]Print [5]Baseline
Fig. 4-42 Wavelength Scan Data
Time Scan
0.800
ABS
0.000
START:Meas.; Select function.：_
[1]Data [2]Scale [3]Save [4]Print
4 - 38
400.0 525.0
0 60.0
Fig. 4-43 Time Scan Data
CELL A
650.0 nm
CELL A
120 s