Electrical System; Clamping Devices For Workpieces And Tools; Environmental Protection - Grizzly G0884 Owner's Manual

1.14 Electrical system

Have the machine and/or the electrical equipment checked regularly, at least every six months.
Immediately eliminate all defects such as loose connections, defective wires, etc.
A second person must be present during work on live components to disconnect the power in
the event of an emergency. Immediately disconnect the CNC machine if there are any
anomalies in the power supply!
"Maintenance" on Page 46.

1.15 Clamping devices for workpieces and tools

ATTENTION!
hen taking over the existing clamping devices, please check critically if
the clamping device is appropriate for your CNC machine.
• Only use clamping devices which have a complete inherent stiffness.
• Contact the manufacturer of the clamping device regarding the reuse of the
clamping devices after damages on the clamping devices due to collisions.
• Correctly insert the workpiece and make sure that the machine is in proper
working condition.
1.16 Protection of the environment and waters
The CNC machine is a device to produce, handle and use materials which are hazardous to
water according to Water Resources laws .
When operating, decommissioning or disassembing the CNC machine or parts hereof, please
follow the requirements of the Water Resources laws . Please find detailed information about this
topic in the regulation on devices to treat materials which are hazardous to water.
-18-
Model G0884 (Mfd. Since 02/19)