Optional Accessories - Makita HR2650 Instruction Manual

1.
Remove the dust case while pressing down the
lever of the dust case.
Fig.35: 1. Lever
2.
Fig.36: 1. Flat-blade screwdriver 2. Filter case
3.
Fig.37: 1. Filter 2. Filter case
4.
attach them to the dust case aligning the protrusion on
Fig.38: 1. Protrusion 2. Groove
5. Close the cover of the dust case, and then attach
it to the tool.
Replacing sealing cap
If the sealing cap is worn out, the performance of the
dust collection decreases. Replace it if it's worn out.
Remove the sealing cap, and then attach a new one
with its protrusion facing upward.
Fig.39: 1. Protrusion 2. Sealing cap
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool spec-
use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
bits)
NOTE: Some items in the list may be included in the
differ from country to country.
13 ENGLISH