Honda CITY Hybrid 2021 Manual page 251

uuHonda Sensing * uCollision Mitigation Braking System (CMBS)
■
CMBS On and Off
Safety Support Switch
Left Selector Wheel
* Not available on all models
250
When you turn the CMBS on and off, do the
following.
1. Press the safety support switch.
2. Roll the left selector wheel to the
symbol and push it.
u The message appears on the driver
information interface when the system
becomes on or off.
u A tick appears in the box and the colour
of the symbol changes green when
the system is on. The tick disappear and
the colour of the symbol changes
gray when the system is off.
The CMBS is turned on every time you turn
the power system on, even if you turned it off
the last time you drove the vehicle.
1Collision Mitigation Braking System (CMBS)
The CMBS may automatically shut off, and the safety
support indicator (amber) will come and stay on
under certain conditions:
2 CMBS Conditions and Limitations P. 251
The CMBS is not activated for about 15 seconds after
the power system is turned on.
You can also select the safety support content from
the driver information interface.
2 Driver Information Interface P. 111
The adaptive cruise control (ACC) (amber), vehicle
stability assist (VSA) system, vehicle stability assist
(VSA) OFF, safety support indicators (amber) and low
tyre pressure/deflation warning system indicator
may come on after reconnecting the 12-volt battery.
Drive a short distance at more than 20 km/h. The
indicator should go off. If it does not, have your
vehicle checked by a dealer.
*