Vol/Sq/Id Knob; Nav Detail Window Soft Keys; Dme Detail Window Soft Keys; Adf Controls - Honeywell BENDIX/KING KTR 2280 System Installation Manual

n
KTR 2280 Preliminary H 08/17/06

3.3.2.5 VOL/SQ/ID KNOB

Pushing the volume knob on the PFD Controller will toggle selection of the Morse code ID
filter.

3.3.2.6 NAV DETAIL WINDOW SOFT KEYS

The soft keys control the NAV mode {BRG (bearing displayed, direct NAV tuning), RAD
(radial displayed, direct NAV tuning) or STBY (standby frequency displayed, active/
standby NAV tuning)} and allow access to the DME detail window.

3.3.2.7 DME DETAIL WINDOW SOFT KEYS

The soft keys control the DME association with each NAV and toggle the DME hold mode.

3.3.3 ADF CONTROLS

3.3.3.1 DETAIL BUTTON

The DETAIL button on either the PFD or MF Controller activates a secondary window
related to the currently active window providing additional details or controls related to the
item. A subsequent selection of the DETAIL button removes the secondary window and
displays the primary window for the item. Selection of modes from the MFC is
accomplished using the SEL outer knob.

3.3.3.2 ADF DETAIL WINDOW SOFT KEYS

The soft keys control the ADF mode (ADF, ANT, or BFO). Pressing the FREQ SWAP
button on the PFD or MF Controller while on the ADF detail page also changes the ADF
modes.
Rev. 0, Aug/2006 Page 3-12
©Honeywell International Inc. Do not print without express permission of Honeywell