Adf Tuning Sub-Window; Adf Frequency; Volume Control Indication/Scale; Soft Key Identifier - Honeywell BENDIX/KING KTR 2280 System Installation Manual

n
KTR 2280 Preliminary H 08/17/06
The DME association selection (NAV1, NAV2) and DME Hold mode control are shown in
the DME detail window. The active modes are shown with a large font in white, and the
inactive modes are shown with a smaller font in cyan.

3.2.6 ADF TUNING SUB-WINDOW

The Pilot and Copilot ADF functions and display locations are as shown in the following
examples of the ADF tuning sub-window.

FIGURE 3-9 ADF TUNING SUB-WINDOW

3.2.6.1 ADF FREQUENCY

The ADF frequency is displayed in white on the left side of the ADF tuning sub-window.

3.2.6.2 VOLUME CONTROL INDICATION/SCALE

The volume control scale and the indication of the current volume level are located at the
top of the ADF tuning sub-window in the middle. The volume scale is visible only when the
volume knob is being rotated, and is automatically removed from the display one second
after volume knob rotation ceases.

3.2.6.3 SOFT KEY IDENTIFIER

This shows the function of the soft key on the PFD bezel next to the identifier. The choices
are ADF, ADF1, or ADF2.

3.2.6.4 ADF MODE

This shows the function of the soft key on the PFD bezel next to the identifier. The choices
are ADF, ANT, or BFO.
Rev. 0, Aug/2006 Page 3-7
©Honeywell International Inc. Do not print without express permission of Honeywell